Lazy AndyOct 16, 20193 minInvestigationsSo, in quite typical fashion I’ve forgotten exactly what I did 10 years ago... either a sign of age or generally using up the available s...
Lazy AndyOct 12, 20193 minResurrection!!Many moons ago, and I do mean many, a friend at school sat me down to teach me the chords to Hey Joe while he noodled the solos over the ...
Lazy AndyMay 24, 20192 minLet’s call this a trial runBody, check; neck, check; template, check.... pickguard? I’ve bought a sheet of 2mm white single ply pickguard material from Tonetech Lut...
Lazy AndyMay 20, 20192 minTemplatingThe next step was to transfer the paper CAD template onto ply wood and cut out a more rigid guide for routing out the plastic pickguard. ...
Lazy AndyMay 19, 20191 minSingle PickupNext step on the Bullet project is to cut a plywood template for the pickguard. I could just translate the CAD file onto the plastic and...
Lazy AndyMay 17, 20192 minHi Tech vs Lo TechThe first job on the Bullet was to get a neck on order, but I’ll cover that a bit later. Whilst I was waiting for that to be delivered, t...
